RFL Electronics IMUX 2000 - User Manual

Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
INSTRUCTION MANUAL
IMUX 2000
Intelligent T1 Multiplexer
With Digital Access Cross-Connect
(M-DACS)
NOTICE
M-DACS-T1 RFL Electronics Inc.
January 1, 2013 i (973) 334-3
100
The information in this manual is proprietary and confidential to RFL Electronics Inc. Any reproduction
or distribution of this manual, in whole or part, is expressly prohibited, unless written permission is given
by RFL Electronics Inc.
This
manual has been compiled and checked for accuracy. The information in this manual does not
constitute a warran
ty of performance. RFL Electronics Inc. reserves the right to revise this manual and
make changes to its contents from time to time. We assume no liability for losses incurred as a result of
out-of-date or incorrect information contained in this manual.
Note: Th
is product is covered by US Patent number 7,061,905
RFL Electronics Inc.
353 Powerville Road ● Boonton Twp., NJ 07005-9151 USA
Tel: 973.334.3100 ● Fax: 973.33
4.3863
Email: sales@rflelect.com
● www.rflelect.com
Publication Number MC
MDACS-T1
Printed in U.S.A.
Revised January 1, 2013

Summary

Instruction Manual

Warranty

Warnings and Safety Summary

General Safety Precautions

Covers essential safety measures for installation, operation, and maintenance by qualified persons.

Fiber Optic Warning

Highlights potential eye damage from laser light sources during maintenance.

Section 1. PRODUCT INFORMATION

Overview

Provides a general overview of the IMUX 2000 T1/E1 MDACS system.

Key Features and Benefits

Details the significant features and advantages of the IMUX 2000 T1/E1 MDACS.

Section 2. FUNCTIONAL DESCRIPTION OF THE IMUX 2000 (M-DACS)

2.2 MULTIPLEXER CONFIGURATIONS AND SYSTEMS

2.3 M-DACS MULTIPLEXER COMPONENTS

Section 3. SYSTEM OVERVIEW

3.1 M-DACS THEORY OF OPERATION

Explains the underlying principles of how the M-DACS operates.

Section 4. SETUP AND CONFIGURATION

4.2 CM4 MODES

4.3 SETTING JUMPERS ON THE CM4 COMMON MODULE

Step-by-step guide to configuring CM4 common module jumpers for proper operation.

4.4 USING THE CM4, GROUP AND SET;NEXT SWITCHES

Instructions on using CM4 switches for navigating and setting functions.

4.11 SETTING M-DACS MULTIPLEXER NETWORK ADDRESS (ADDR Group)

Guide to setting the network address for M-DACS multiplexers.

4.15 USING THE ALARM CUT-OFF SWITCH

Details on the functionality and usage of the alarm cut-off switch.

Section 5. NETWORK MANAGEMENT SOFTWARE

5.2 SOFTWARE INSTALLATION

Step-by-step instructions for installing the Network Management Software.

5.3 CONNECTING YOUR PC TO THE NETWORK

How to connect your PC to the network for NMS operation.

5.5 EXAMPLE OF CONFIGURING A NETWORK

A step-by-step example of configuring a network using the NMS.

Section 6. REMOTE CONFIGURATION

Section 7. INSTALLATION AND CHECK-OUT

7.2 INSTALLATION

Provides step-by-step installation instructions for the IMUX 2000 M-DACS.

7.3 SYSTEM CHECK-OUT PROCEDURES

Outlines procedures for verifying operation after installation.

7.4 ADDING CHANNEL MODULES TO EXISTING SYSTEMS

Section 8. TROUBLESHOOTING

8.2 GENERAL TROUBLESHOOTING

General guidelines and hints for troubleshooting.

8.4 FUSE REPLACEMENT

Instructions for replacing fuses.

Section 9. POWER SUPPLY AND P;S ALARM I;O

9.2 POWER SUPPLY MODULE

Details about the power supply modules.

RFL Electronics IMUX 2000 Specifications

General

Brand	RFL Electronics
Model	IMUX 2000
Category	Multiplexer
Language	English