Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
WARNING
YOUR M-DACS MULTIPLEXER MAY BE EQUIPPED WITH
FIBER OPTIC INPUT/OUTPUT MODULES THAT HAVE
FIBER OPTIC EMITTER HEADS. FIBER OPTIC EMITTER
HEADS USE A LASER LIGHT SOURCE THAT PRODUCE
INVISIBLE RADIATION. FIBER OPTIC COMMUNICATION
SYSTEMS ARE INHERENTLY SAFE IN NORMAL
OPERATION BECAUS
E ALL RADIATION IS CONTAINED IN
THE SYSTEM. IT IS POSSIBLE DURING MAINTENANCE TO
EXPOS
E THE RADIATION BY REMOVING OR BREAKING
THE FIBER. STARING DIRECTLY INTO THE LIGHT BEAM
MAY RESULT IN PERMANENT EYE DAMAGE AND/OR
BLINDNESS. NEVER LOOK DIRECTLY INTO THE LIGHT
BEAM AND BE CAREFUL NOT TO SHINE THE LIGHT
AGAINST ANY REFLECTIVE SURFACE.
THE LASER SOURCE IS A CLASS I LASER PRODUCT
WHICH COMPLIES WITH APPLICABLE FDA, OSHA AND
ANSI S
TANDARDS.
SPECIAL NOTE
RFL products are not designed for safety critical direct control of nuclear reactors and should not be
used as such.
M-DACS-T1 RFL Electronics Inc.
January 1, 2013 v (973) 334-3100
To Next Page
Loading...