Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
RFL DS-961D RFL Electronics Inc.
October 14, 2004 2 (973) 334-3100
SPECIFICATIONS
As of the date this Instruction Data Sheet was published, the following specifications apply to the RFL
DS-961D module. Because all of RFL products undergo constant improvement and refinement, these
specifications are subject to change without notice.
Multiple Synchronous
Data Channels: Full duplex, five independent RS-232 data ports
Clock/Data Rates: Five channel operation:
A selectable common rate of 1200 bps, 2400 bps, 4800 bps, or 9600 bps
Two channel operation:
A common rate of 19.2 kbps
Three channel operation:
Two channels at 19.2 kbps, one at 9600 bps
Timing: Selectable, internal or external
Buffer: Three-bit when using external timing source (terminal timing)
Time Slot: Five channels occupy a single selectable 64 kbps time slot
RS-232 Interface: Supports TXD, RXD, RX TIMING, TX TIMING, TERMINAL
TIMING, GROUND
Remote Interface: Compatible with SCL remote command language, allows module
configuration and status access
Connector: The DS-961D requires the use of an MA-404A Module Adapter, which
provides five RJ-11 jacks for the RS-232 interfaces
Temperature: 0° - 50°C Operating
Humidity: 0% - 90% Non-condensing
Power Consumption: 1.2 watts nominal
To Next Page
Loading...