EasyManua.ls Logo

RFL Electronics IMUX 2000 - Page 664

Default Icon
982 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Because RFL and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specications without notice.
RFL VF-16B RFL Electronics Inc.
January 17, 2007 4 (973)
334-3100
Nominal Ringing Voltage: (Not used with external Ring Generator MA-302 and MA-302A).
Vtip to Vring
Vrms Optional Vdc Offset Frequency MAX REN @ < 100 ft.
40.5 +30 20 Hz +/- 1% 5
45 +20 20 Hz +/- 1% 5
53 +10 20 Hz +/- 1% 5
63.5 NA 20 Hz +/- 1% 3.2
Automatic Ring Down (ARD): Requires RFL VF-16, VF-16A, VF-16B or VF-16E FXS modules on
each end of circuit. Ring 1.5 seconds on, 4.5 seconds off, with a ringback tone of 440 Hz. If
VF-16Bs are on both ends, ringback is dual tone 440 Hz and 480 Hz.
Interface: MA-301, MA-301C, MA-303, MA-303B, MA-304, MA-304B, MA-302 or MA-302A
module adapters. (See page 5 for more information.)
Testing: Two Bantam jacks (Drop/Line) provided for each channel.
Operating Temperature: -20
o
C to +55
o
C (-4
o
F to +131
o
F).
Relative Humidity: Zero to 90 percent, non-condensing.

Table of Contents