Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
Chapter 8 - Management Information Base (MIB)
SNMP Access Gateway User’s Manual - v1.0 -- 11/99 - Page 28
11.4.1.5 - connectionsPTTimelimit
12 - alarmhistory
12.1 - actionQueue
12.1.1 - actionCount
12.1.2 - actionTable
12.1.2.1 - actionTableEntry
12.1.2.1.1 - actionTableIndex
12.1.2.1.2 - actionAcked
12.1.2.1.3 - actionReason
12.1.2.1.4 - actionReasonID
12.1.2.1.5 - actionReasonLevel
12.1.2.1.6 - actionType
12.1.2.1.7 - actionTypeID
12.1.2.1.8 - actionRepeatTime
12.1.2.1.9 - actionAttempts
12.1.2.1.10 - actionNextAttempt
12.1.2.1.11 - actionTimeStamp
12.2 - actionHistory
12.2.1 - historyCount
12.2.2 - historyTable
12.2.2.1 - historyTableEntry
12.2.2.1.1 - historyTableIndex
12.2.2.1.2 - historyEntryType
12.2.2.1.3 - historyReason
12.2.2.1.4 - historyReasonID
12.2.2.1.5 - historyReasonLevel
12.2.2.1.6 - historyType
12.2.2.1.7 - historyTypeID
12.2.2.1.8 - historyTimeStamp
12.2.2.1.9 - historyClearLog
13 - iprestrictions
13.1 - iprestrictTable
13.1.1 - iprestrictTableEntry
13.1.1.1 - iprestrictTableIndex
13.1.1.2 - iprestrictIpAddress
99 - techsupport
99.1 - techsupportInt1
99.2 - techsupportInt2
99.3 - techsupportInt3
99.4 - techsupportInt4
99.5 - techsupportInt5
snmplinkMainTrap TRAP-TYPE
ENTERPRISE snmplinkThisProduct
VARIABLES { thisTrapString }
DESCRIPTION
“An snmplinkMainTrap is issued when a sensor or data alarm trap is to be issued. The thisTrapString contains a
string formatted using the trap format controls. The string may contain a data alarm record if the trap is a data alarm
trap."
::= 10
To Next Page
Loading...