Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
Chapter 9 - SNMP Configuration and Control
SNMP Access Gateway User’s Manual - v1.0 -- 11/99 - Page 39
historyReasonID This integer object indicates the identifier for
the reason why the action was taken as shown in
the actionReasonID object.
historyReasonLevel This integer object indicates the alarm level for
the reason why the action was taken as shown in
the actionReasonLevel object.
historyType This integer object indicates the type of action
which is logged in the history log table (e.g.,
pager, trap, etc.).
historyTypeID This integer object indicates the which of the
historyType objects was used in relation to this
history log entry.
historyTimeStamp This text string contains the date and time at
which the history log entry was made.
historyClearLog When this integer object is set to any value, the
history log entries are all cleared.
9.14 - IPRestrictions This section of the MIB contains IP access
restriction entries.
iprestrictIpAddress Each IpAddress type entry in this table contains
an IP restriction. See the section on network
setup and IP restrictions on more information on
using the IP restriction table.
9.15 - Tech Support The techsupport section of the MIB contains
objects which are used for technical support of
the SNMP Access Gateway. These objects should not
be set by the user. Contents of these objects
when retrieved are not defined for public use.
These objects will read with integer values, which
allows these objects to be read by SNMP managers.
99 techsupport
1 techsupportInt1
2 techsupportInt2
3 techsupportInt3
4 techsupportInt4
5 techsupportInt5
To Next Page
Loading...