SERVICE PROGRAM MODE
B121 Series/B259 Series 5-10 SM
2996*
Transfer Roller Cleaning
2996 1 Selects whether the transfer roller is cleaned before each copy job. Set this to “1” if
dirty background is appearing on the reverse side of the first page of copy jobs.
Note that this will increase the time required to generate the first copy. If the setting
is “0”, the transfer roller is never cleaned ( 6.12.3).
2998*
Main Scan Magnification [–0.5 ~ +0.5 / 0.0 / 0.1%/step]
2998 1 Adjusts the magnification along the main scan direction, for all print modes (copy,
fax, printing). The specification is 100 ± 1.0% ( 3.13.1).
To Next Page
Loading...
