SERVICE PROGRAM MODE
SM 5-37 B121 Series/B259 Series
Service
Tables
White Number of Attempt
[0 ∼ 20 / 0 / 1/step]
4901 10
Displays how many times the white-level adjustment is retried. The value does not
include the first execution of the white adjustment. For example, if the value is "2",
this indicates that the white-level adjustment has been executed three times. The
white-level adjustment can be executed 20 times or less. Therefore, if the value is
"20," this indicates that the white-level adjustment has ended abnormally (as
described, the value "20" does not include the first execution). If the white-level
adjustment is unsuccessful, the machine uses the result of the latest, successful
white-level adjustment.
Auto Adjustment Setting
[222 ∼ 281 / 256 / 1/step]
4901 11*
Displays the parameter of the white-level adjustment. The value is based on the
result of SP4-901-12.
Auto Adjustment-Result
[0 ∼ 600 / 0 / 1/step]
4901 12
Displays the result of the white-level adjustment. Normally, the value is between
228 and 281 (including the both values). When the value is normal, it is stored as
the value of SP4-901-11.
Auto Adjustment-Error [0 = Normal / 1 = Error] 4901 14
Displays a return code of the white-level adjustment. The code "1" (error) is
returned if the adjustment result value is less than 228 or larger than 281 ( SP4-
901-12).
4902*
Exposure Lamp ON
4902 1 Turns the exposure lamp on or off. To turn off the exposure lamp, select “OFF”.
(The exposure lamp shuts off automatically after 180 seconds.)
4903*
ADS Level
[0 ∼ 255 / 252 / 1/step]
4903 1 Adjusts the ADS level.
4904*
ADS Lower Limit
[0 ∼ 255 / 80 / 1/step]
4904 1 Adjusts the ADS lower limit.
4905*
ADS Level [0 = All / 1 = One]
4905 1 Checks the whole area (0 = All) or the area between 15 mm and 90 mm from the
left edge (1 = One) to adjust the ADS level.
To Next Page
Loading...
