SERVICE PROGRAM MODE
SM 5-39 B121 Series/B259 Series
Service
Tables
Line Width Correction
4927*
Adjusts the line width correction algorithm. Positive settings produce thicker lines;
negative settings produce thinner lines. This setting is only applied to the originals
in SP4-921 ( 6.5.4).
4927 1 Line Width Correction (Copy)
4927 2 Line Width Correction (Fax)
4927 3 Line Width Correction (Scanner)
[–2 ~ 2 / 0 / 1/step]
Independent Dot Erase
4928*
Selects the dot erase level. Higher settings provide greater erasure. This setting is
only applied to the originals in SP4-921 ( 6.5.4).
4928 1 Independent Dot Erase (Copy)
4928 2 Independent Dot Erase (Fax)
4928 3 Independent Dot Erase (Scanner)
[–2 ~ 2 / 0 / 1/step]
Positive/Negative [0 = No, 1 = Yes]
4929*
Inverts white and black. This setting is only applied to the originals in SP4-921 (
6.5.4).
4929 1 Positive/Negative (Copy)
4929 2 Positive/Negative (Fax)
Sharpness-Edge [–2 ~ 2 / 0 / 1/step]
4930*
Adjust the clarity. This setting is only applied to the originals in SP4-921 ( 6.5.4).
4930 1 Sharpness-Edge (Copy)
4930 2 Sharpness-Edge (Fax)
4930 3 Sharpness-Edge (Scanner)
Sharpness-Solid [–2 ~ 2 / 0 / 1/step]
4931*
Adjust the clarity. This setting is only applied to the originals in SP4-921 ( 6.5.4).
4931 1 Sharpness-Solid (Copy)
4931 2 Sharpness-Solid (Fax)
4931 3 Sharpness-Solid (Scanner)
Sharpness-Low ID [–2 ~ 2 / 0 / 1/step]
4932*
Adjust the clarity. This setting is only applied to the originals in SP4-921 ( 6.5.4).
4932 1 Sharpness- Low ID (Copy)
4932 2 Sharpness- Low ID (Fax)
4932 3 Sharpness- Low ID (Scanner)
To Next Page
Loading...
