SERVICE PROGRAM MODE
B121 Series/B259 Series 5-52 SM
5870
Common Key Info
Common Key Info Writing 5870 1
Writes to flash ROM the common proof for validating the device for NRS
specifications.
Common Key Info Initialize
SSP
5870 3
Initializes the area for the key information.
5873
SD Card Application
SD Card Application Transport 5873 1
Transports the application programs.
SD Card Application Transport Redo 5873 2
Nullifies the processing of SP5-873-1.
5902
Test Pattern Print
5902 1 5.1.13
5907*
Plug & Play Setting
5907 1 Selects the brand name and production name for the Plug and Play function. These
names are registered in the NVRAM. If the NVRAM becomes defective, these
names should be re-registered. Use the right-arrow or left-arrow key to scroll
through the list of brand names. To select a brand name, press the OK key. An
asterisk (*) indicates which manufacture is currently selected.
5.1.7
5913
Switchover Permission Time [3~30 / 3 / 1 s]
5913 2 Sets the amount of time to elapse while the machine is in standby mode (and the
operation panel keys have not been used) before another application can gain
control of the display.
5914* Application Counter Display [0 = Off / 1 = On]
5914 1* Printer Counter
5914 3* Copy Counter
Selects whether or not these total counters are displayed in
the UP mode.
5918* A3/DLT Counter Display [0 = Off / 1 = On]
5918 1 Sets the key press display for the counter key. This setting has no relation to (SSP)
SP5-104 A3/DLT Double Count.
SSP
5970*
Debug Serial Output DFU [0 = Off / 1 = On]
5970 1 Determines whether the debug information is output by the serial port when the
machine is powered on.
5974* ScanRouter Server 0: Lite, 1: Full
5674 1 Switches writing between the Scan Router Lite application provided and the
optional full (Professional) version.
To Next Page
Loading...
