SERVICE PROGRAM MODE
SM 5-69 B121 Series/B259 Series
Service
Tables
8524 3 Staple
8524 4 Booklet
8524 5 Z-Fold
8524 6 Punch
8524 7 Other
S:PrtPGS/FIN [0~9999999/ 0 / 1] 8525*
These SPs count by finishing mode the total number of pages printed by the
Scanner application.
8525 1 Sort
8525 2 Stack
8525 3 Staple
8525 4 Booklet
8525 5 Z-Fold
8525 6 Punch
8525 7 Other
8771 Dev Counter [0~9999999/ 0 / 1]
8771 1
Counts the frequency of use (number of rotations of the development rollers)
for black and other color toners.
Note: For machines that do not support color, the Black toner count is the
same as the Total count.
8801 Toner Remain [0~100/ 0 / 1]
8801 1
This SP displays the percent of toner remaining for each color. This SP allows
the user to check the toner supply at any time.
Note:
• This precise method of measuring remaining toner supply (1% steps) is
better than other machines in the market that can only measure in
increments of 10 (10% steps).
• This SP is expanded for color MFP and color LP machines. For this
machine, the count is done for black only.
Machine Status
[0 ∼ 9999999 / 0 / 1 sheet/step]
8941*
Displays the total operating time classified by machine status. The time is displayed
in the following format: day:hour:minute:second.
Operation Time 8941 1
The total time when the engine is operating.
Standby Time 8941 2
The total time when the machine is in the standby mode.
Energy Save Time 8941 3
The total time when the machine is in the energy saver mode.
Low Power Time 8941 4
The total time when the machine is in the low power mode.
Off Mode Time 8941 5
The total time when the machine is executing background printing.
8941 6 Down Time/SC
The total waiting time due to SC occurrences.
To Next Page
Loading...
