BIT SWITCHES
SM 35 B620
Fax Option
B620
Printer Switch 0E SP No. 1-103-015
No FUNCTION COMMENTS
0
Paper size selection priority
0: Width
1: Length
0: A paper size that has the same width as the
received data is selected first.
1: A paper size which has enough length to print all
the received lines without reduction is selected first.
1
Paper size selected for
printing A4 width fax data
0: 8.5" x 11" size
1: A4 size
This switch determines which paper size is selected
for printing A4 width fax data, when the machine has
both A4 and 8.5" x 11" size paper.
2
Page separation
0: Enabled
1: Disabled
1: If all paper sizes in the machine require page
separation to print a received fax message, the
machine does not print the message (Substitute
Reception is used).
After a larger size of paper is set in a cassette, the
machine automatically prints the fax message.
3
to
4
Printing the sample image on
reports
Bit 4 Bit 3 Setting
0 0 The upper half
only
0 1 50% reduction
in sub-scan only
1 0 Same size
1 1 Not used
“Same size” means the sample image is printed at
100%, even if page separation occurs.
User Parameter Switch 19 (13H) bit 4 must be set to
“0” to enable this switch.
Refer to Detailed Section Descriptions for more on
this feature.
5-6 Not used Do not change the settings.
7
Equalizing the reduction ratio
among separated pages
(Page Separation)
0: Enabled
1: Disabled
0: When page separation has taken place, all the
pages are reduced with the same reduction ratio.
1: Only the last page is reduced to fit the selected
paper size when page separation has taken place.
Other pages are printed without reduction.
Printer Switch 0F SP No. 1-103-016
No FUNCTION COMMENTS
0
to
1
Smoothing feature
Bit 1 Bit 0 Setting
0 0 Disabled
0 1 Disabled
1 0 Enabled
1 1 Not used
(0, 0) (0, 1): Disable smoothing if the machine
receives halftone images from other manufacturers
fax machines frequently.
2-3 Not used Do not change the settings.
4
Printing fax messages in user
code mode
0: Enabled
1: Disabled
1: The machine holds the received fax messages
until the machine exits the restricted access mode
(user code or key counter).
If the machine enters the restricted access mode
again while printing fax messages, the machine
stops printing the machine exits the mode again.
5-7 Not used Do not change the settings.
To Next Page
Loading...
