SERVICE RAM ADDRESSES
B620 68 B620
6800DF(H) - User parameter switch 15 (SWUSR_0F)
Bits 0, 1 and 2: Cassette for fax printout
Bit 2 1 0 Setting
0 0 1 1st paper feed station
0 1 0 2nd paper feed station
0 1 1 3rd paper feed station
1 0 0 4th paper feed station
1 0 1 5th paper feed station
Other settings Not used
Bits 3 and 4: Not used
Bit 5: Using the cassette specified by bits 0, 1 and 2 above only 0: On, 1: Off
Bits 6 and 7: Not used
6800E0(H) – User parameter switch 16 (SWUSR_10)
(This switch is not printed on the user parameter list.)
Bits 0 and 1: Not used
Bit 2: Paper size selection priority for an A4 size fax message when A4/LT size
paper is not available.
0: A3 has priority, 1: B4 has priority
Bits 3 to 7: Not used
6800E1(H) – User parameter switch 17 (SWUSR_11)
Bit 0: Specifies the mode to select the group address for the IFAX function.
0: Priority Select Mode
1: All Select Mode
Bit 1: Not used
Bit 2: Inclusion of the “Add” button when a sequence of Quick/Speed dials is
selected for broadcasting
0:Not needed, 1: Needed
Bits 3 to 6: Not used
Bit 7: Press “Start” key without an original when using the on hook dial or the
external telephone,
0: displays “Cannot detect original size”.
1: Receives fax messages.
6800E2(H) - User parameter switch 18 (SWUSR_12)
Bit 0: TTI date 0: Off, 1: On
Bit 1: TTI sender 0: Off, 1: On
Bit 2: TTI file number 0: Off, 1: On
Bit 3: TTI page number 0: Off, 1: On
Bits 4 and 5: TTI selection
Bit 5 4
0 0 TTI 1
0 1 TTI 2
1 0 TTI off
1 1 Not used
Bit 6 to 7: Not used
To Next Page
Loading...
