Rockwell Automation Allen-Bradley E300

Rockwell Automation Publication 193-UM015D-EN-P - February 2015 359
Metering and Diagnostics Chapter 8
Trip History 0
Trip History 0 (Parameter 127) reports the most recent trip event.
Trip History 1
Trip History 1 (Parameter 128) reports the second most recent trip event.
Trip History 2
Trip History 2 (Parameter 129) reports the third most recent trip event.
Trip History 3
Trip History 3 (Parameter 130) reports the fourth most recent trip event.
95 Analog Module installed does not match the expected type
96 Test Mode is engaged and current/voltage was detected
97 Heap memory could not be allocated
98 Vendor ID hardware fault
Trip History 0 (Parameter 127)
Default Value 0
Minimum Value 0
Maximum Value 99
Parameter Type UINT
Size (Bytes) 2
Scaling Factor 1
Units 
Trip History 1 (Parameter 128)
Default Value 0
Minimum Value 0
Maximum Value 99
Parameter Type UINT
Size (Bytes) 2
Scaling Factor 1
Units 
Trip History 2 (Parameter 129)
Default Value 0
Minimum Value 0
Maximum Value 99
Parameter Type UINT
Size (Bytes) 2
Scaling Factor 1
Units 
Trip History Code Description