406 Rockwell Automation Publication 193-UM015D-EN-P - February 2015
Chapter 9 EtherNet/IP Communications
10. Navigate through the E300 Overload Relay device profile tree to make
additional configuration edits. When finished, press OK.
11. For users who are adding a preconfigured E300 Electronic Overload Relay
offline in an RSLogix 5000 or Studio 5000 project, download the updated
project to the Logix controller to establish communications between the
E300 Electronic Overload Relay and the Logix controller and to apply
these changes to the Logix controller and E300 Electronic Overload Relay.
For users who are adding a preconfigured E300 Electronic Overload Relay online
to a ControlLogix controller, a display will appear verifying the intent to create a
module online.
To Next Page
Loading...
