SATO FX3-LX User Manual

Safety Precautions
12
Handling the power
cord
• Do not damage, break, or modify the power cord. Also, do not place
heavy objects on the power cord, heat it, or pull it because doing so
could damage the power cord and cause a fire or electric shock.
• If the power cord becomes damaged (core is exposed, wires broken,
etc.), contact your SATO reseller or technical support center. Using
the power cord in this condition could cause a fire or electric shock.
• Do not modify, excessively bend, twist, or pull the power cord. Using
the power cord in such a condition could cause a fire or electric
shock.
• The power cord set that comes with the product is designed
especially for this product. Do not use it with any other electrical
devices.
When the product
has been dropped or
broken
• If the product is dropped or broken, immediately turn off the power
switch, unplug the power cord from the outlet, and contact your
SATO reseller or technical support center. Using the product in this
condition could cause a fire or electric shock.
Do not use the product
when something is
abnormal about it
• Continuing to use the product in the event something is abnormal
about it, such as smoke or unusual smells coming from it, could
result in fire or electric shock. Immediately turn off the power switch,
unplug the power cord from the outlet, and contact your SATO
reseller or technical support center for repairs. It is dangerous for the
customer to try to repair it, so absolutely do not attempt repairs on
your own.
Do not disassemble
the product
• Do not disassemble or modify the product. Doing so could result in
fire or electric shock. Ask your SATO reseller or technical support
center to conduct internal inspections, adjustments, and repairs.
• Never try to take apart the AC adapter or modify it in any way such
as with a solder iron.
Do not operate with
wet hands
• Do not replace the battery pack or unplug the AC adapter or battery
charger with wet hands. Doing so increases the risk of electric shock.

SATO FX3-LX Specifications

General

Cutter	Yes
Certification	EN55032, EN55024, EN61000-3-2 / 3-3, EN300 330-2 / -1, EN301 489-1 / -3 / -17, FCC Part15 Subpart B, ICES 003 UL60950-1, CSA C22.2 No.60950-1, IEC/EN60950-1 FCC Part15 Subpart C/E, ISED RSS-Gen, ISED RSS-247, EN 300 328, EN 301 893
Built-in barcodes	AZTECCODE, CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, Data Matrix, EAN13, EAN8, GS1 COMPOSITE, GS1 DataBar, GS1-128, Industrial 2/5, Interleaved 2/5, Matrix 2/5, MaxiCode, Micro QR Code, MicroPDF417, PDF417, POSTNET, QR Code, UPC-A, UPC-E
Built-in RFID module	No
Maximum resolution	- DPI
Maximum print height	500 mm
Maximum printing width	80 mm
Battery voltage	14.4 V
AC input voltage	100 - 240 V
Battery capacity	1950 mAh
AC input frequency	50 / 60 Hz
Suitable for use in country/location	Europe
Sustainability certificates	ENERGY STAR
Display	LCD
Control type	Touch
Product color	White
Display diagonal	7 \
Display resolution	480 x 800 pixels
International Protection (IP) code	IPX2
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.1
USB 2.0 ports quantity	4
Connectivity technology	Wired & Wireless
Media thickness	0.14 - 0.19 mm
Maximum roll diameter	105 mm
Storage temperature (T-T)	-5 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 75 %
Cables included	AC
Quantity per pack	1 pc(s)
Languages support	Multi

Weight and Dimensions

Depth	225 mm
Width	132 mm
Height	180 mm
Weight	3000 g