SATO FX3-LX User Manual

13
Using the head
cleaning fluid
• Use of flame or heat around the head cleaning fluid is prohibited.
Absolutely do not heat it or subject it to flames.
• Keep the fluid out of reach of children to prevent them from
accidentally drinking it. If a child accidentally drinks the fluid,
immediately consult with a physician.
Laser beam
• Do not look into the laser radiation window, and do not direct the
laser beam at someone. If the laser beam hits eyes, it may cause
visual disturbance.
Print head
• The print head is hot after printing. Be careful not to get burned when
replacing media or cleaning immediately after printing.
• Touching the edge of the print head with bare hands could result in
injury. Be careful not to become injured when replacing media or
cleaning.
Regarding the cutter
• Do not touch the cutter with your hands or do not put something into
the cutter. Doing so could result in an injury.
Handling the AC
Adapter
• Do not damage, break, or change the AC adapter. If you place a
heavy object on the AC adapter or heat, bend too much, twist, or pull
the AC adapter, the AC adapter may be damaged, which may cause
fire or electric shock.
• If the AC adapter is damaged (the wires exposed or broken), contact
your SATO reseller or technical support center. If you operate the
product in this condition, it may cause fire or electric shock.
Battery Pack
• Never try to take apart the battery pack or modify it in any way such
as with a solder iron.
• When charging the battery pack, make sure to use the product or the
specified battery charger.
• Do not allow the battery to get wet with water or any liquid.
• Do not throw or drop the battery, subjecting it to strong impacts or
shocks. Also, never use a damaged or deformed battery. Doing so
may lead to abnormal overheating or fire.
• Do not rub your eyes if the battery liquid leaks and comes into
contact with your eyes. Rinse well with clean water such as tap
water, and seek medical attention immediately.
• If charging is not completed after the specified time elapses, stop
charging immediately.

SATO FX3-LX Specifications

General

Cutter	Yes
Certification	EN55032, EN55024, EN61000-3-2 / 3-3, EN300 330-2 / -1, EN301 489-1 / -3 / -17, FCC Part15 Subpart B, ICES 003 UL60950-1, CSA C22.2 No.60950-1, IEC/EN60950-1 FCC Part15 Subpart C/E, ISED RSS-Gen, ISED RSS-247, EN 300 328, EN 301 893
Built-in barcodes	AZTECCODE, CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, Data Matrix, EAN13, EAN8, GS1 COMPOSITE, GS1 DataBar, GS1-128, Industrial 2/5, Interleaved 2/5, Matrix 2/5, MaxiCode, Micro QR Code, MicroPDF417, PDF417, POSTNET, QR Code, UPC-A, UPC-E
Built-in RFID module	No
Maximum resolution	- DPI
Maximum print height	500 mm
Maximum printing width	80 mm
Battery voltage	14.4 V
AC input voltage	100 - 240 V
Battery capacity	1950 mAh
AC input frequency	50 / 60 Hz
Suitable for use in country/location	Europe
Sustainability certificates	ENERGY STAR
Display	LCD
Control type	Touch
Product color	White
Display diagonal	7 \
Display resolution	480 x 800 pixels
International Protection (IP) code	IPX2
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.1
USB 2.0 ports quantity	4
Connectivity technology	Wired & Wireless
Media thickness	0.14 - 0.19 mm
Maximum roll diameter	105 mm
Storage temperature (T-T)	-5 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 75 %
Cables included	AC
Quantity per pack	1 pc(s)
Languages support	Multi

Weight and Dimensions

Depth	225 mm
Width	132 mm
Height	180 mm
Weight	3000 g