EasyManuals Logo

SATO FX3-LX User Manual

SATO FX3-LX
566 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Safety Precautions
14
If you notice any unusual odor, deformation, fluid leakage or other
unusual conditions during use, charging or storage, stop using the
battery to avoid risk of fire, personal injury and electric shock.
If you notice any leakage or unusual odor, keep the battery away
from fire immediately.
Never expose the battery to direct flame, throw it into fire, or take any
actions that may lead to shorting.
Do not act anything may cause short-circuiting of terminals of battery.
AC Adapter/Battery
Charger
Do not wet or immerse the AC adapter in water. Doing so could result
in a failure or electric shock.
Use only the specified AC adapter/battery charger. Using a different
one may create the danger of fire or electric shock.
Never use the battery charger with any other battery pack except for
the specified one. Doing so can rupture the battery, cause leakage,
fire or electric shock.
Do not use in
hazardous locations
The product is not explosion proof certified.
Do not use in a potentially explosive environment or atmosphere.
Do not place in areas
with high humidity
Do not place the product in areas with high humidity or where
condensation forms. If condensation forms, immediately turn off
the power switch and do not use the product until it dries. Using the
product while condensation is on it could result in electric shock.
Carrying the product
When moving the product, always unplug the power cord from the
outlet and check to make sure all external wires are disconnected
before moving it. Moving the product with the wires still connected
could damage the cords or connecting wires and result in a fire or
electric shock.
Do not carry the product with media loaded in it. The media could fall
out and cause an injury.
When setting the product on the floor or a stand, be sure not to get
your fingers or hands pinched under the product feet.

Table of Contents

Other manuals for SATO FX3-LX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SATO FX3-LX and is the answer not in the manual?

SATO FX3-LX Specifications

General IconGeneral
CutterYes
CertificationEN55032, EN55024, EN61000-3-2 / 3-3, EN300 330-2 / -1, EN301 489-1 / -3 / -17, FCC Part15 Subpart B, ICES 003 UL60950-1, CSA C22.2 No.60950-1, IEC/EN60950-1 FCC Part15 Subpart C/E, ISED RSS-Gen, ISED RSS-247, EN 300 328, EN 301 893
Built-in barcodesAZTECCODE, CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, Data Matrix, EAN13, EAN8, GS1 COMPOSITE, GS1 DataBar, GS1-128, Industrial 2/5, Interleaved 2/5, Matrix 2/5, MaxiCode, Micro QR Code, MicroPDF417, PDF417, POSTNET, QR Code, UPC-A, UPC-E
Built-in RFID moduleNo
Maximum resolution- DPI
Maximum print height500 mm
Maximum printing width80 mm
Battery voltage14.4 V
AC input voltage100 - 240 V
Battery capacity1950 mAh
AC input frequency50 / 60 Hz
Suitable for use in country/locationEurope
Sustainability certificatesENERGY STAR
DisplayLCD
Control typeTouch
Product colorWhite
Display diagonal7 \
Display resolution480 x 800 pixels
International Protection (IP) codeIPX2
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.1
USB 2.0 ports quantity4
Connectivity technologyWired & Wireless
Media thickness0.14 - 0.19 mm
Maximum roll diameter105 mm
Storage temperature (T-T)-5 - 60 °C
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)30 - 90 %
Operating relative humidity (H-H)30 - 75 %
Cables includedAC
Quantity per pack1 pc(s)
Languages supportMulti
Weight and Dimensions IconWeight and Dimensions
Depth225 mm
Width132 mm
Height180 mm
Weight3000 g

Related product manuals