EasyManuals Logo

SATO FX3-LX User Manual

SATO FX3-LX
566 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
Top cover
Be careful not to get your fingers pinched when opening or closing
the top cover. Also be careful that the top cover does not slip off and
drop.
Loading media
When loading a media roll, be careful not to get your fingers pinched
between the media roll and the supply unit.
When not using the
product for a long time
When not using the product for a long time, remove the battery
pack from the product and unplug the AC adapter from the outlet to
maintain safety.
During maintenance
and cleaning
When maintaining and cleaning the product, remove the battery
pack from the product and unplug the AC adapter from the outlet to
maintain safety.
AC adapter
An AC adapter may become hot. Be careful not to get burned.
The AC adapter set provided for this product is specific to this
product. Do not use it for other electric equipment.
When disconnecting the AC adapter from the outlet, be sure to grip
it by the plug. Pulling on the cord may expose or break the wires and
possibly cause fire or electric shock.
Do not put the AC adapter near a hot device. Leaving the AC adapter
near a hot device could cause the adapter’s housing to melt and
possibly cause fire or electric shock.
Handling the AC
adapter when moving
On the occasion of carrying, first disconnect the AC adapter from the
outlet. If the AC adapter is not disconnected, it may be damaged,
which may cause fire or electric shock.
Battery pack
If the battery pack leaks and gets on your skin or clothes,
immediately rinse well with clean water, such as tap water. It may
cause skin rashes.
If you notice any rust, unusual odor, overheating, or other unusual
conditions during your first use after purchase, stop using the battery
pack and contact your SATO reseller or technical support center.

Table of Contents

Other manuals for SATO FX3-LX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SATO FX3-LX and is the answer not in the manual?

SATO FX3-LX Specifications

General IconGeneral
CutterYes
CertificationEN55032, EN55024, EN61000-3-2 / 3-3, EN300 330-2 / -1, EN301 489-1 / -3 / -17, FCC Part15 Subpart B, ICES 003 UL60950-1, CSA C22.2 No.60950-1, IEC/EN60950-1 FCC Part15 Subpart C/E, ISED RSS-Gen, ISED RSS-247, EN 300 328, EN 301 893
Built-in barcodesAZTECCODE, CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, Data Matrix, EAN13, EAN8, GS1 COMPOSITE, GS1 DataBar, GS1-128, Industrial 2/5, Interleaved 2/5, Matrix 2/5, MaxiCode, Micro QR Code, MicroPDF417, PDF417, POSTNET, QR Code, UPC-A, UPC-E
Built-in RFID moduleNo
Maximum resolution- DPI
Maximum print height500 mm
Maximum printing width80 mm
Battery voltage14.4 V
AC input voltage100 - 240 V
Battery capacity1950 mAh
AC input frequency50 / 60 Hz
Suitable for use in country/locationEurope
Sustainability certificatesENERGY STAR
DisplayLCD
Control typeTouch
Product colorWhite
Display diagonal7 \
Display resolution480 x 800 pixels
International Protection (IP) codeIPX2
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.1
USB 2.0 ports quantity4
Connectivity technologyWired & Wireless
Media thickness0.14 - 0.19 mm
Maximum roll diameter105 mm
Storage temperature (T-T)-5 - 60 °C
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)30 - 90 %
Operating relative humidity (H-H)30 - 75 %
Cables includedAC
Quantity per pack1 pc(s)
Languages supportMulti
Weight and Dimensions IconWeight and Dimensions
Depth225 mm
Width132 mm
Height180 mm
Weight3000 g

Related product manuals