Operation - Operating instruments
6 - 25
830 / 07.2012
Original operating instructions
Floating axle control The front axle has oscillating suspension; the oscillating axle can be
used to level out unevenness in the track.
Note
The floating axle control minimizes the danger of tipping. The boom can
be found above both the front and rear axles (upper structure parallel
to the undercarriage/0° or 180° position).
Switch position Conditions Status
Floating axle control
activated
0° position
or
180° position
Driving the machine
–Symbol is
displayed in
SENCON
Control lamp
does not light up
– Floating axle
free, must be
in 0° or 180°
position
Floating axle control
activated
No 0° position
or
180° position
or
Machine is not
being moved
–Symbol is not
displayed
Control lamp
does not light up
– Floating axle
locked
0° position 180° position
To Next Page
Loading...