Operation - Operating instruments
6 - 31
830 / 07.2012
Original operating instructions
Boom floating
position
The floating position function depends on the working tool. Floating
grab setting: When the “Close grab” function is actuated, the compact
boom is simultaneously raised at low speed. This prevents the grab
from scratching on the ground.
Floating hammer setting: The full weight of the stick acts on the
hammer. The stick cylinder is not pressurized in this case.
Diesel filter heating
Off/On
The diesel filter heating is used for preheating at low temperatures.
Central lubrication The central lubrication system automatically lubricates the slewing
track of the swiveling connection as well as the bearings of the
equipment. The lubrication cycle is pre-set at the factory.
Lubrication can be actuated manually in addition to the pre-set
lubrication cycle.
Pinion/gear lubrication The pinion/gear lubrication lubricates the gear teeth of the swing ring.
Lubrication can be actuated manually.
To Next Page
Loading...