Operation - Additional displays (optional equipment)
6 - 40
830 / 07.2012
Original operating instructions
Engine oil preheating The machine is equipped with an engine oil pre-heater (1).
To activate the engine oil pre-heater (1) of the engine (3), the socket (2)
in the left-hand storage space of the machine must be connected to the
mains. The socket (2) is fused via the fuse box (4).
Only the plug and not the cable for power supply to the socket is
supplied by SENNEBOGEN!
The cable must only be connected by a trained specialist!
Warning
Maintenance and repair work must only be carried out by trained
specialist personnel.
Note
Observe the notes in the engine manufacturer's operating instructions.
To Next Page
Loading...