sennebogen 830 E - Page 260

Operation - Work application
6 - 74
830 / 07.2012
Original operating instructions
DANGER
Danger to life if the safety limit shutdown for “Retract stick” is set
incorrectly!
Attachments or parts of the load can strike and penetrate the cab.
Always adjust the basic factory setting to the particular attachment
(e.g. grab). The operator alone is responsible for operation of the
machine with an incorrectly set safety limit shutdown for “Retract stick”!
Auxiliary limiting Using the optional Auxiliary limiting you can limit the “Extend stick” or
“Hoist up”. This is useful
 In the vicinity of power lines (see
 In buildings with limited headroom
 Under bridges
 When working with attachments not supplied by SENNEBOGEN
Note
The following safety limit shutdowns can be used optionally:
 “Extend stick”
 “Boom up” (hoist up)
 “Boom down” (hoist down)
Note
The optional auxiliary limiting cannot be bypassed.