Siemens SIMOCODE pro

System description
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
1-53
Faults The "Faults" menu item provides an overview of all pending faults.
For detailed information: See "Display of all pending faults".
Error buffer The "Error buffer" menu item displays the SIMOCODE pro device-
internal error buffer.
For detailed information, see "Reading out the device-internal error
buffer".
Event memory The "Event Memory" menu item enables access to the
SIMOCODE pro device-internal event memory.
For detailed information, see "Reading out the device-internal event
memory".
Note
This is only displayed for OPD versions above *E04*and BU2 above
*E07* with a DM-F present.
Identification In the "Identification" menu item you will find detailed information/
labeling regarding SIMOCODE pro hardware components (basic
unit, operator panel with display).
For detailed information, see: "Identification of the motor feeder and
the SIMOCODE pro components".
About SIMOCODE The "About SIMOCODE" menu item displays further information
about SIMOCODE pro.
Table 1-9: Menu of the operator panel with display and menu navigation (Cont.)