Siemens SIMOCODE pro System Manual

System description
SIMOCODE pro
GWA 4NEB 631 6050-22 DS 03
1-77
Digital module 1, digital module 2
Inputs 1, 2, 3, 4 Inputs 1, 2, 3, 4 "monostable" or "bistable".
Note
Only possible if digital module 1 is being used as monostable or
bistable.
Monostable outputs Outputs 1, 2 "monostable".
Note
• Only possible if digital module 1 is being used as monostable.
• For OPDs up to version *E03*: The display is different.
Bistable outputs Bistable outputs 1, 2.
Note
• Only possible if digital module 1 is being used as monostable.
• For OPDs up to version *E03*: The display is different.
Table 1-15: Displays the current status of all device I/Os (Cont.)

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000