Siemens SINAMICS S120 Combi - Page 286

Cabinet design and EMC
12.5 Connection system
SINAMICS S120 Combi
286 Manual, 11/2017, 6SL3097-4AV00-0BP7
Comparison of MOTION-CONNECT power cables
MOTION-CONNECT 500 power cables are mainly suitable for permanent routing. The
MOTION-CONNECT 800PLUS power cables fulfill all high mechanical requirements for the
use in tow chains. They are resistant to cutting oils.
Table 12- 8 Comparison of the MOTION-CONNECT 500 and MOTION-CONNECT 800PLUS power cables
Power cable
MOTION-CONNECT 500
MOTION-CONNECT 800PLUS
Approvals
VDE
1)
cURus or UR/CSA
UR-CSA File No.
2)
in conformance with RoHS
Yes
UL758-CSA-C22.2-N.210.2-M90
Yes
Yes
Yes
UL758-CSA-C22.2-N.210.2-M90
Yes
Yes
Rated voltage V
0
/V in accordance with EN 50395
Supply conductors
Signal conductors
600 V / 1000 V
24 V (EN) 1000 V (UL/CSA)
600 V / 1000 V
24 V (EN) 1000 V (UL/CSA)
Test voltage, rms
Supply conductors
Signal conductors
4 kV
2 kV
4 kV
2 kV
Operating temperature at the surface
Permanently installed
Moveable
-20 … +80 °C
0 … 60 °C
-20 … +80 °C
-20 … +60 °C
Strain, max.
Permanently installed
Moveable
50 N/mm
2
20 N/mm
2
50 N/mm
2
20 N/mm
2
Smallest bending radius
Permanently installed
Moveable
5 x D
max
Approx. 18 x D
max
4 x D
max
Approx. 8 x D
max
Torsional stress
30°/m absolute
30°/m absolute
Bending operations
100000
10 million
Max. traversing speed
30 m/min Up to 300 m/min
Max. acceleration
2 m/s
2
50 m/s
2
(3 m)
insulation material
CFC/silicone-free CFC/halogen/silicone-free
IEC 60754-1 / DIN VDE 0472-815
Oil resistance
EN 60811-2-1
(mineral oil only)
EN 60811-2-1
Protective jacket
PVC PUR, HD22.10 S2
(VDE 0282, Part 10)
Flame retardant
EN 60332-1-1 to 1-3
EN 60332-1-1 to 1-3
1)
The registration number is printed on the cable jacket.
2)
The file number is printed on the cable jacket.