08/2005 Expanding the Operator Interface (BE1)
7 Configuring and Working Environment
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
BE1/7-151
7 Configuring and Working Environment
7.1 General information about the configuring environment ..................BE1/7-152
7.2 HMI Embedded and HT6 ..................................................................BE1/7-154
7.2.1 Structure of the COMMON.COM control file .................................BE1/7-156
7.2.2 Creating configuration files on NC or Flash file system ................BE1/7-164
7.2.3 Procedure for HMI Embedded and HT6........................................BE1/7-166
7.2.4 Testing configured screen forms in the PC/PG environment ........BE1/7-168
7.3 HMI Advanced ..................................................................................BE1/7-168
7.3.1 Saving the configuration files onto the hard disk of the HMI .........BE1/7-168
7.3.2 Saving the alarm text files onto the hard drive of the PCU50 .......BE1/7-169
7.3.3 Testing configured screen forms in the PC/PG environment ........BE1/7-169
7.4 Common HW plattform for both HMI systems ..................................BE1/7-170
7.4.1 General information about searches .............................................BE1/7-170
7.4.2 Search method for COMMON.COM..............................................BE1/7-174
7.4.3 Search sequence for images.........................................................BE1/7-175
7.5 Special considerations for HT6.........................................................BE1/7-176
7