Starting Up HMI Embedded (IM2) 08/2005
8 Diagnostics
© Siemens AG, 2005. All rights reserved
IM2/8-120 SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
8.1.1 Log file: "action.log"
The log file is output in English.
File structure of "action.log"
The log file is divided into 4 columns:
• Date
• Time
• NCU name
• Event
Example of an "action.log":
Date Time Event specification
26.02.1999 07:45:20 HMI booting (conn.no: 0, MM_ACTION_LOG_MODE:
ff, entries: 4094)
26.02.1999 07:45:20 Alarm 300701
29.09.1999 18:59:10 Key: 68 KEY_SELECT_MODE (0)
29.09.1999 18:59:07 Open window: 20005
29.09.1999 18:59:07 Close window: 20020
Output of the window name
The window name, if known, is displayed in addition to the window ID in the action
log.
e.g.:
....
27.02.2002 18:59:07 Open window: (10001) Alarm
For older software versions, you can find an assignment of the window IDs to the
window names in the "Documentation\ Window Lists" directory on the software CD.
For each software version, there is an assignment file, which contains the version
ID in the file name (e.g., 060507.txt for the software version P06.05.07).
The installed software version appears at the start of the log file.
To Next Page
Loading...
Need help?
General
