Commissioning HMI Advanced (IM4) 08/2005
2 Functions/Parameterization
© Siemens AG, 2005. All rights reserved
IM4/2-60 SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
Parameterization
The names of the soft keys are predefined.
HSx x 1 - 8 , Horizontal soft keys 1 to 8
VSy y 1 - 8 , Vertical softkeys 1 to 8
Not all softkeys need to be assigned.
Reference: /IAM/ BE1 Section “Configuring OP Hotkeys and PLC Keys”.
2.4.6 Setting User-Specific OperatorMenus
Application
Skeleton applications can be generated with the following additional options:
• Free design of operating tree: creation of new operating levels, new
arrangement of softkeys for previous operating levels and the new operating
levels.
• Integration of user applications in the operating levels (OEM applications).
• Calling of standard applications from any operating level, including defined
submenus.
• Using the "Skeleton application" function, existing operating areas used in HMI
Advanced can be combined and selected with a new softkey – simply by
means of configuration. This releases operating areas/softkeys in the main
menu for dedicated operating areas (OEM applications).
• The "Skeleton application" function can be used repeatedly to define a
subordinate operating level from an existing operating level. This allows free
operating tree design.
• A skeleton application can define up to 16 horizontal and 8 vertical softkeys.
When you leave an operating area that was selected from a skeleton application,
you return to the higher-level menu of the skeleton application.
The following standard applications can be selected from a skeleton application:
- Machine
- Parameters
- Services
- Program
- - Simulation → HMI settings
- Diagnostics
- Startup and
- OEM applications
To Next Page
Loading...
Need help?
General
