Expanding the Operator Interface (BE1) 08/2005
3 Syntax
© Siemens AG, 2005. All rights reserved
BE1/3-42 SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
Toggle-field-dependent displays
The toggle field is overlaid with graphics, which change depending on the value of
the flag byte. If, for example, the flag byte has the value 1, image1 is displayed, for
value 2, image2. The position and size of the image are indicated under Position
I/O field (left, top, width, height).
DEF VAR1=(IDB/*1="\\image1.bmp",
2="\\image2.bmp"//,"$85000"/wr1//"MB[0]"//160,40,50,50)
3.3.8 Multi-column screen forms
Multiple variables can also be represented in the main part of the screen form on
one line.
In this case, the variables are all defined in the configuration file on a single
definition line.
DEF VAR11 = (S///"Var11"), VAR12 = (I///"Var12")
To make individual variables in the configuration file more legible, the definition
lines can be wrapped after every variables definition and following comma.
The key word "DEF" always indicates the beginning of a new line.
DEF Tnr1=(I//1/"","T ",""/wr1///,,10/20,,50),
TOP1=(I///,"Type="/WR2//"$TC_DP1[1,1]"/80,,30/120,,50),
TOP2=(R3///,"L1="/WR2//"$TC_DP3[1,1]"/170,,30/210,,70),
TOP3=(R3///,"L2="/WR2//"$TC_DP4[1,1]"/280,,30/320,,70),
TOP4=(R3///,"L3="/WR2//"$TC_DP5[1,1]"/390,,30/420,,70)
DEF Tnr2=(I//2/"","T ",""/wr1///,,10/20,,50),
TOP21=(I///,"Type="/WR2//"$TC_DP1[2,1]"/80,,30/120,,50),
TOP22=(R3///,"L1="/WR2//"$TC_DP3[2,1]"/170,,30/210,,70),
TOP23=(R3///,"L2="/WR2//"$TC_DP4[2,1]"/280,,30/320,,70),
TOP24=(R3///,"L3="/WR2//"$TC_DP5[2,1]"/390,,30/420,,70)
...
To Next Page
Loading...
Need help?
General
