08/2005 Starting Up HMI Embedded (IM2)
9 Configure Windows in the NC Program
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
IM2/9-135
9.9 List of files for the Files dialog
Parts programs
%_N_MMC_EXAMPLE1_MPF
N10 MMC("CYCLES,PICTURE_ON,T_SK.COM,SCREEN1,GUD4.DEF,,,A1","N")
N20 TEST_1 = 1
N25 G4 F10
N30 MMC("CYCLES,PICTURE_OFF","N")
N40 M30
%_N_MMC_EXAMPLE2_MPF
N10 MMC("CYCLES,PICTURE_ON,T_SK.COM,SCREEN6,GUD4.DEF,,10,
T1,G1","N")
N15 G4 F15
N20 MMC("CYCLES,PICTURE_OFF","N")
N25 M30
%_N_MMC_EXAMPLE3_MPF
N15MMC("CYCLES,PICTURE_ON,T_SK.COM,SCREEN1,GUD4.DEF,,,F1","S")
N20 TEST_1 = 5
N30 MMC("CYCLES,PICTURE_OFF","N")
N40 M30
%_N_MMC_EXAMPLE4_MPF
N15 MMC("CYCLES,PICTURE_ON,T_SK.COM,SCREEN2,GUD4.DEF,,,C1","S")
N20 TEST_3 = 5
N30 MMC("CYCLES,PICTURE_OFF","N")
N40 M30
%_N_MMC_EXAMPLE5_MPF
N15 MMC("CYCLES,PICTURE_ON,T_SK.COM,SCREEN8,GUD4.DEF,GRA.BMP,,
M1","S")
N30 MMC("CYCLES,PICTURE_OFF","N")
N40 M30
To Next Page
Loading...
Need help?
General
