Siemens SINUMERIK 840D Commissioning Manual

Commissioning HMI Advanced (IM4) 08/2005
2 Functions/Parameterization
© Siemens AG, 2005. All rights reserved
IM4/2-86 SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
[PRELOAD]
;=1: TO_INI.INI and TO_ADDON.INI are preloaded by DPNCSIM.EXE
;=0: TO_INI.INI and TO_ADDON.INI are loaded by simulation
TOOLS=0
;= 1: all cycles are preloaded by DPNCSIM.EXE
; if section MAIN, entry CYCLE is set, additionally all cycles from
shadow directory are preloaded by DPNCSIM.EXE
;= 0: cycles are loaded by simulation, if cycle is called
CYCLES=1
;=2: load for simulation to \CUS.DIR, \CMA.DIR or \CST.DIR (default)
; load only cycles from NCK
; only evaluated if [MAIN]CYCLE is set and [PRELOAD]CYCLES=1
;=0: load all cycle (from NCK and MMC) for simulation to
; \CUS.DIR, \CMA.DIR or \CST.DIR
; only evaluated if [MAIN]CYCLE is set and [PRELOAD]CYCLES=1
;=1: use the cycle interface in \DP.DIR\SIM.DIR
CYCLEINTERFACE=2
2.5.9 HEADER.INI
[CondStopIcons]
DefaultIcon=CondWait.bmp ;0 = No wait state
1=CondStop.bmp ;No NC ready
2=CondStop.bmp ;No ModeGroup ready
3=CondStop.bmp ;EMERGENCY STOP active
4=CondStop.bmp ;Alarm active with stop
5=CondStop.bmp ;M0/M1 active
6=CondStop.bmp ;Block ended in SBL mode
7=CondStop.bmp ;NC Stop active
8=CondStop.bmp ;Read-in enable missing
9=CondStop.bmp ;Feed enable missing
10=CondWait.bmp ;Dwell active
11=CondWait.bmp ;Aux. function acknowledgment missing
12=CondStop.bmp ;Axis enable missing
13=CondWait.bmp ;Exact stop not reached
14=CondWait.bmp ;Waiting for positioning axis
15=CondWait.bmp ;Waiting for spindle
16=CondWait.bmp ;Waiting for other channel
17=CondStop.bmp ;Waiting for feed override
18=CondStop.bmp ;Error in NC block
19=CondStop.bmp ;Waiting for external NC blocks
20=CondWait.bmp ;Waiting for synchronous action
21=CondWait.bmp ;Block search active
22=CondStop.bmp ;No spindle enable
23=CondStop.bmp ;Axis feed override 0
24=CondWait.bmp ;Waiting for tool change acknowledgment
25=CondWait.bmp ;Gear step change
26=CondWait.bmp ;Waiting for position control
27=CondWait.bmp ;Waiting for thread cut
28=CondWait.bmp ;Reserved
29=CondWait.bmp ;Waiting for punching

Siemens SINUMERIK 840D Specifications

General

Series	SINUMERIK 840D
Axes	Up to 31
Channels	Up to 10
Operating System	Windows-based
Power Supply	24 V DC
Control Unit Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
Interpolation	Spline
PLC	Integrated PLC
Data Storage	CompactFlash, USB