Starting Up HMI Embedded (IM2) 08/2005
4 Functions/Parameterization
© Siemens AG, 2005. All rights reserved
IM2/4-48 SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
//* Name of channel area 7 and names of channels of channel
area 7 */
3080246 "" //2x9 T_CHAN_AREA_7
3080247 "" //2x9 T_CHAN_AREA_7_CHANNEL_1
3080248 "" //2x9 T_CHAN_AREA_7_CHANNEL_2
3080249 "" //2x9 T_CHAN_AREA_7_CHANNEL_3
3080250 "" //2x9 T_CHAN_AREA_7_CHANNEL_4
3080251 "" //2x9 T_CHAN_AREA_7_CHANNEL_5
3080252 "" //2x9 T_CHAN_AREA_7_CHANNEL_6
3080253 "" //2x9 T_CHAN_AREA_7_CHANNEL_7
3080254 "" //2x9 T_CHAN_AREA_7_CHANNEL_8
//* Name of channel area 8 and names of channels of channel
area 8 */
3080255 "" //2x9 T_CHAN_AREA_8
3080256 "" //2x9 T_CHAN_AREA_8_CHANNEL_1
3080257 "" //2x9 T_CHAN_AREA_8_CHANNEL_2
3080258 "" //2x9 T_CHAN_AREA_8_CHANNEL_3
3080259 "" //2x9 T_CHAN_AREA_8_CHANNEL_4
3080260 "" //2x9 T_CHAN_AREA_8_CHANNEL_5
3080261 "" //2x9 T_CHAN_AREA_8_CHANNEL_6
3080262 "" //2x9 T_CHAN_AREA_8_CHANNEL_7
3080263 "" //2x9 T_CHAN_AREA_8_CHANNEL_8
The OEM user can enter texts by inserting them in the blank character strings (see
above "")!
8 characters are possible per softkey bar; the carriage return is created with
characters "%n": e.g., "NC3Turn%nChann1".
4.5 Selecting tool management
The ShopTurn, ShopMill tool management function is activated using the display
machine data MD 9414: TM_KIND_OF_TOOLMANAGEMENT for the
representation of ShopMill/ShopTurn.
MD 9414 = 1 ShopMill/ShopTurn tool management
MD 9414 = 0 Standard tool management (default setting)
All the information needed for setup can be found in:
References: /FBW/ Description of Functions - Tool Management
/FBSP/ Description of Functions - ShopMill
/FBT/ Description of Functions - ShopTurn
To Next Page
Loading...
Need help?
General
