Siemens SINUMERIK 840D Commissioning Manual

08/2005 Commissioning HMI Advanced (IM4)
2 Functions/Parameterization
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D Installation and Start-Up HMI (IAM) - 08/2005 Edition
IM4/2-93
JOG_HAND=7 ; Handwheel in JOG mode
==>6 Suggestion operator
JOG_ANKRATZ=7 ; Scratch
==>6 Suggestion operator
JOG_INCREM=7 ; Set increment in JOG mode
==>6 Suggestion operator
JOG_SYNAKT=7 ; Synchronous actions in JOG mode
==>5 Suggestion machine setter
JOG_V_ISTW=7 ; watch windows of Actual-values,
==>7 Suggestion everyone
; Spindles, G functions, Aux. functions,
; feed rate, tools or axis feed rate in JOG mode
JOG_V_ZOOM=7 ; Zoom actual values in JOG mode
==>7 Suggestion everyone
JOG_INCHMET=7 ; Switch inch/metric in JOG mode
==>6 Suggestion operator
REF_SISITEC=4 ; Commit safety integrated Ref.Point
==>4 key 3 to stay compatible
MDI_PROGBE=7 ; Program control at MDI mode
==>6 Suggestion operator
MDI_HAND=7 ; Handwheel in MDI mode
==>6 Suggestion operator
MDI_EDITOR=7 ; Edit program in MDI mode
==>5 Suggestion machine setter
MDI_ED_DAT=7 ; Editor functions in MDI mode
==>5 Suggestion machine setter
MDI_ED_CLR=7 ; Clear buffer in MDI mode
==>5 Suggestion machine setter
MDI_V_ISTW=7 ; watch windows of Actual-values,
==>7 Suggestion everyone
; Spindles, G functions, Aux. functions,
; Feedrate, Tools or Axis feedrate in MDI mode
MDI_V_ZOOM=7 ; Zoom actual values in MDI mode
==>7 Suggestion everyone
MDI_SYNAKT=7 ; Synchronous actions in MDI mode
==>5 Suggestion machine setter
MDI_DATEI=4 ; File functions in MDI mode
MDI_INCHMET=7 ; Switch inch/metric in MDI mode
==>6 Suggestion operator
AUTO_OVERST=7 ; Overstore in AUTO mode
==>5 Suggestion machine setter
AUTO_DRF=7 ; DRF in AUTO mode
==>6 Suggestion operator
AUTO_PROGBE=7 ; Program control in AUTO mode
==>6 Suggestion operator
AUTO_SASUCH=7 ; Blocksearch in AUTO mode
==>6 Suggestion operator
AUTO_HAND=7 ; Handwheel in AUTO mode
==>6 Suggestion operator
AUTO_KORREK=7 ; Correct program in AUTO mode
==>5 Suggestion machine setter

Siemens SINUMERIK 840D Specifications

General

Series	SINUMERIK 840D
Axes	Up to 31
Channels	Up to 10
Operating System	Windows-based
Power Supply	24 V DC
Control Unit Type	CNC
Interface	Ethernet, PROFIBUS
Display	TFT color display
Interpolation	Spline
PLC	Integrated PLC
Data Storage	CompactFlash, USB