08/2005 Expanding the Operator Interface (BE1)
3 Syntax
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
BE1/3-59
Content of the table block
The table block comprises:
1. A header description
2. 1 to n column descriptions
Header
//G(Table identifier/Table type/Number of lines / [Fixed line attribute],[Fixed column
attribute])
Table identifier:
The table identifier is used without a leading % sign. It can only be used once in
each screen form.
Table type:
0 (default value) Standard table for PLC or user data
(NCK and channel-specific data)
1 (and others, reserved)
No. of lines:
Number of lines including header
Fixed line attribute:
1 Active
0 Not active
Fixed column attribute:
0 Active
1 Not active
The fixed line or fixed column is not scrolled.
The number of columns is the number of columns configured.
Column definitions
Column definition line:
(type / limit values / empty / long text, column header / attributes / help image /
system or OPI variable/column width/offset1, offset2, offset3)
Type Data type of the values in the column
Limit values Limit values for variables:
Limit value MIN, limit value MAX
The limit values are separated by a comma.
Limit values can be entered for types I, C and R in
decimal format or as characters in the format
"A", "F".
The Limit Values parameter works in conjunction with the
Limit attribute (see Attributes, Limit li).
Default setting: Empty
Long text, column header
Attribute See Subsection 3.3.3 "Screen form elements"
Help display See Subsection 3.3.3 "Screen form elements"
To Next Page
Loading...
Need help?
General
