08/2005 Expanding the Operator Interface (BE1)
3 Syntax
© Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl/840D/840Di/810D HMI Installation and Start-Up Guide (IAM) – 08/2005 Edition
BE1/3-75
An additional identifier indicating the generated version is inserted in the user
comment of the generated code in versions > 0.
• Variables used previously may not be changed.
• New variables are inserted in the existing (cycle) configuration in arbitrary
order.
• It is not permissible to delete variables from a screen form from one version to
the next.
• The screen form must contain all variables of all versions.
The newest screen form with all its variables is always displayed.
Example configuration with version identifiers:
;Version 0 (default)
//M(XXX)
DEF var100=(R//1)
DEF var101=(S//"Hello")
DEF TMP
VS8=("GC")
PRESS(VS8)
GC("NC1")
END_PRESS
OUTPUT(NC1)
var100",,"var101
END_OUTPUT
; ************ Version 1, extended definition ***************
//M(XXX)
DEF var100=(R//1)
DEF var101=(S//"Hello")
DEF var102(1)=(V//"HUGO")
DEF TMP
VS8=("GC")
PRESS(VS8)
GC("NC1")
END_PRESS
...
;Original
OUTPUT(NC1)
var100","var101
END_OUTPUT
...
;and the new version in addition
;Version 1
OUTPUT(NC1,1)
var100","var101"," var102
END_OUTPUT
To Next Page
Loading...
Need help?
General
