Sony CBK-HD01 - Page 106

4-16
PDW-700/V1 (E)
AUTO IRIS Display (Setting AUTO IRIS)
Item Setting Function
IRIS OVERRIDE OFF/ON Turns ON/OFF the AUTO IRIS OVERRIDE function
When set to ON, the reference value of the AUTO IRIS can be
changed by the MENU knob
(9 steps: _1, _0.75, _0.5, _0.25, 0, +0.25, +0.5, +0.75, +1)
IRIS SPEED (_99 to 99) Sets the AUTO IRIS response speed. _99 (Slow) ↔ 99 (Fast)
CLIP HIGH LIGHT OFF/ON Turns ON/OFF the function that limits the AUTO IRIS
detection level to 100% when the video signal of higher than
100% is input
IRIS WINDOW 1/2/3/4/5/6/VAR Selects the IRIS WINDOW (detection range)
*1
When VAR is selected, the iris window can be set by the
IRIS VAR WIDTH/HEIGHT/H POS/V POS as described
below
IRIS WINDOW IND OFF/ON Turns ON/OFF the function that checks the iris window with
the box cursor
IRIS VAR WIDTH 20 to 479 Sets width of the iris window when VAR is selected in the
above IRIS WINDOW
IRIS VAR HEIGHT 20 to 269 Sets height of the iris window when VAR is selected in
the above IRIS WINDOW
IRIS VAR H POS _460 to 459
*2
Sets the center in the horizontal direction of the iris window
when VAR is selected in the above IRIS WINDOW
IRIS VAR V POS _250 to 249
*2
Sets the center in the vertical direction of the iris window
when VAR is selected in the above IRIS WINDOW
*1 : The IRIS WINDOW is set as shown below.
*2 : Range of this setting is different depending upon the above IRIS VAR WIDTH/HEIGHT setting.
O16 AUTO IRIS TOP
IRIS OVERRIDE : OFF
IRIS SPEED : 0
CLIP HIGH LIGHT : OFF
IRIS WINDOW : 1
IRIS WINDOW IND : OFF
IRIS VAR WIDTH : 240
IRIS VAR HEIGHT : 135
IRIS VAR H POS : 0
IRIS VAR V POS : 0
Setting 1 2 3 4 5 6
VF
screen
Shaded ( ) area : IRIS WINDOW frame