Sony CBK-HD01 - Page 135

4-45
PDW-700/V1 (E)
TIMECODE Display (Setting on TIME CODE)
NTSC AREA PAL AREA
Item Setting Function
TC OUT AUTO/GENE Sets the time-code signal output
AUTO : Outputs the time-code generator during
recording and outputs the time-code reader
during playback
GENE : Outputs the time-code generator during
recording and playback
DF/NDF
*1
DF/NDF Sets DF/NDF
DF : Drop frame mode
NDF : Non drop frame mode
EXT-LK DF/NDF
*1
INT/EXT Selects either internal setting or external setting for
DF/NDF
INT : Internal
EXT : External
EXT-LK UBIT INT/EXT Sets whether the LTC UBIT setup value locks to INT
or EXT source when the time-code is locked to an
external source
INT : Internal lock
EXT : External lock
LTC UBIT FIX/TIME Sets the data to be recorded in U-BIT of LTC
FIX : Records the data that is set by user
TIME : Records the present time
VITC UBIT(SD)
*2
FIX/TIME Sets the data to be recorded in U-BIT of VITC
FIX : Records the data that is set by the user
TIME : Records the present time
WATCH AUTO ADJ OFF/ON Turns ON/OFF the function to match the built-in watch
with the actual time data contained in the U-BIT of
external time code data
UBIT GROUP ID 000/101 Selects the UBIT GROUP ID
VITC INS LINE 1
*2
12H to 19H (NTSC AREA) Selects the line into which VITC is to be inserted
9H to 22H (PAL AREA)
VITC INS LINE 2
*2
12H to 19H (NTSC AREA)
9H to 22H (PAL AREA)
*1 : Displayed only when COUNTRY is set to “NTSC(J)AREA” or “NTSC AREA”.
*2 : Displayed only when the CBKZ-MD01 SD Record and Playback Software is installed.
M10 TIMECODE TOP
TC OUT : AUTO
DF/NDF : DF
EXT-LK DF/NDF : INT
EXT-LK UBIT : INT
LTC UBIT : FIX
VITC UBIT(SD) : FIX
WATCH AUTO ADJ : ON
UBIT GROUP ID : 000
VITC INS LINE 1 : 16H
VITC INS LINE 2 : 18H
M10 TIMECODE TOP
TC OUT : AUTO
EXT-LK UBIT : INT
LTC UBIT : FIX
VITC UBIT(SD) : FIX
WATCH AUTO ADJ : ON
UBIT GROUP ID : 000
VITC INS LINE 1 : 19H
VITC INS LINE 2 : 21H