4-84
PDW-700/V1 (E)
BOARD INFO
Item Setting Function
SD REC & PB (DVP) Display only Displaying the diagnosis whether the installed DVP board supports the SD
REC & PB Option or not
(If cross mark (X) is indicated, the DVP board that does not support the
SD REC&PB Option is installed. In such case, the SD REC&PB Option
functions are disabled)
24P REC & PB (DCPxx xx)
*
Display only Displaying the diagnosis whether the installed DCP board supports the
24P REC & PB Option or not
(If cross mark (X) is indicated, the DCP board that does not support the
24P REC&PB Option is installed. In such case, the 24P REC&PB Option
functions are disabled)
PROCYON-V (DCPxx xx)
*
Display only Displaying the diagnosis whether the LSI (corresponding to the LSI: DCP2
on the DEV STATUS page) on the installed DCP board is PROCYON-V or
not
(If cross mark (X) is indicated, the DCP board on which ZXCV is mounted
is installed)
TG VERSION Display only Indicating the ROM Version number of IC8/TG-260 board
* : The board name to be displayed is the name of the board that is actually installed.
SERVICE FILE
Item Setting Function
SVC FILE LOAD Press the MENU knob Loads the SERVICE file from the main unit or a memory stick
to execute this menu item
SVC FILE SAVE Press the MENU knob Saves the SERVICE file in the main unit or a memory stick
to execute this menu item
F.ID 16 characters Sets the file ID
(alphanumeric characters (When the SVC FILE SAVE is executed, this ID is saved)
symbols and spaces)
S24 BOARD INFO TOP
SD REC & PB (DVP)
24P REC&PB (DCPxx xx)
PROCYON-V (DCPxx xx)
TG VERSION : 1.400
S25 SERVICE FILE TOP
SVC FILE LOAD : EXEC
SVC FILE SAVE : EXEC
F.ID:
To Next Page
Loading...
