Basic Setup Configuring the Network
Page 19
© Copyright 2021 Stratasys. All rights reserved.
• Press the Back button to exit the page and return to the Tools page.
Figure 9: Dynamic Network Configuration
7. For wireless networks:
a. The Available Networks row will be displayed (Wi-Fi dongle must be installed). Press
anywhere within this row.
b. Press the Scan button; the printer will scan for an available wireless (Wi-Fi) network.
Figure 10: Scan for Wireless Network
c. A list of available networks will be displayed; select the wireless network you’d like to
connect to by pressing anywhere within the row.
To Next Page
Loading...
