Svantek SVAN 958A - Structure of the File with the Results from Level Meter and Wave Recorder Modes

169
SVAN 958A User Manual
8
Pressure
pressure [hPa]
9
Humidity
humidity [*10%]
10
WindSpeed
wind speed [*10m/s
2
]
11
WindDirection
wind direction [degrees]. 0xFFFF if direction is unavailable
12..13
WindDirTotalPuffs
number of total wind puffs in distribution vector of wind direction
14
NofWindDir
number of elements in distribution vector of wind direction
15..
15+NofWindDir-1
WindDir[i]
WindDir[i] value [*10 %]
15+NofWindDir
NofWindMax
number of elements in distribution vector of max wind speed
16+NofWindDir..
16+NofWindDir+
NofWindMax-1
WindMax[i]
WindMax[i] value [*10 m/s ]
16+NofWindDir+
NofWindMax
NofWindAvg
number of elements in distribution vector of avg wind speed
17+NofWindDir+
NofWindMax...
17+NofWindDir+
NofWindMax+
NofWindAvg-1
WindAvg[i]
WindAvg[i] value [*10 m/s ]
…
…
…
B.3. STRUCTURE OF THE FILE WITH THE RESULTS FROM LEVEL METER AND WAVE RECORDER
MODES
File header - cf. Tab. B.1.1.
Unit and software specification - cf. Tab. B.1.2.
Parameters and global settings - cf. Tab. B.1.3.
Hardware settings for channels - cf. Tab. B.1.4.
Software settings for channels - cf. Tab. B.1.5.
Trigger settings (cf. Tab. B.1.41, Tab.B.1.42).
Vector measurement settings - cf. Tab. B.1.6.
Settings for vibration dose measurement (the presence depends on the MEASURE DOSE and channel filter
settings) - cf. Tab. B.1.9.
Main results - cf. Tab. B.1.10.
RPM results (present if RPM measurement was enabled) - cf. Tab. B.1.34.
SEAT measurements settings (cf. Tab. B.1.36).
Selected statistical levels in channels - cf. Tab. B.1.11.
Header of the statistical analysis in channels (the presence depends on the SAVE STAT. setting) - cf. Tab.
B.1.18.
Results of the statistical analysis in one channel (the presence depends on the SAVE STAT. setting) - cf. Tab.
B.1.19.
File end marker - cf. Tab. B.1.25.