Svantek SVAN 958A - Structure of the File Containing Saved Instruments Setup; Structure of the File Containing Results from RT60 Function; Structure of the File Containing Averaged RT60 Measurement Results

173
SVAN 958A User Manual
Contents of the file from the logger - cf. Tab.B.1.24.
File end marker - cf. Tab. B.1.25.
B.10. STRUCTURE OF THE FILE CONTAINING SAVED INSTRUMENT’S SETUP
File header - cf. Tab. B.1.1.
Unit and software specification - cf. Tab. B.1.2.
Data block of instrument’s setup - cf. Tab.B.1.26.
User filters (the presence depends on the SAVE FILT. setting) - cf. Tab.B.1.28.
File end marker - cf. Tab. B.1.25.
B.11. STRUCTURE OF THE FILE CONTAINING RESULTS FROM RT60 FUNCTION
File header - cf. Tab. B.1.1.
Unit and software specification - cf. Tab. B.1.2.
Parameters and global settings - cf. Tab. B.1.3.
Hardware settings for channels - cf. Tab. B.1.4.
Software settings for channels - cf. Tab. B.1.5. (
all data are meaningless!)
Trigger settings (cf. Tab. B.1.41, Tab.B.1.42).
Vector measurement settings - cf. Tab. B.1.6.
RT60 mode 1/3 OCTAVE analysis header - cf. Tab. B.1.28.
RT60 measurements parameters - cf. Tab. B.1.29.
One-channel RT60 measurement results - cf. Tab. B.1.30
RT60 measurement results averaged between channels - cf. Tab. B.1.32
File end marker - cf. Tab. B.1.25.
B.12. STRUCTURE OF THE FILE CONTAINING AVERAGED RT60 MEASUREMENT RESULTS
File header - cf. Tab. B.1.1.
Unit and software specification - cf. Tab. B.1.2.
Parameters and global settings - cf. Tab. B.1.3.
Hardware settings for channels - cf. Tab. B.1.4.
Software settings for channels - cf. Tab. B.1.5. (
all data are meaningless!)
Trigger settings (cf. Tab. B.1.41, Tab.B.1.42).
Vector measurement settings - cf. Tab. B.1.6.
RT60 mode 1/3 OCTAVE analysis header - cf. Tab. B.1.28.
RT60 measurements parameters - cf. Tab. B.1.29.
Averaged RT60 measurement results in one channel - cf. Tab. B.1.31
Averaged RT60 measurement results averaged between channels - cf. Tab. B.1.33
File end marker - cf. Tab. B.1.25.