Topcon HiPer Plus - Appendix B Specifications

Specifications
Topcon HiPer+ Operator’s Manual
B-2
Survey Mode
Static
Kinematic (Continuous, Stop and Go)
RTK (Real-time Kinematic)
DGPS (Differential GPS)
Survey Accuracy
Static, Fast Static For L1+L2 – H: 3mm + 1ppm x D;
V: 5mm + 1.4ppm x D
For L1 – H: 5mm + 1.4ppm x D;
V: 7mm + 1.9ppm x D
Kinematic
For L1+ L2 – H: 10mm + 1.5ppm x D
;
V: 15mm + 2.0ppm x D
For L1 – H: 15mm + 2.0ppm x D;
V: 20mm + 2.5ppm x D
RTK For L1+ L2 – H: 10mm + 1.5ppm x D;
V: 15mm + 2.0ppm x D
For L1 – H: 15mm + 2.0ppm x D;
V: 20mm + 2.5ppm x D
Cold Start
Warm Start
Reacquisition
< 60 sec
< 10 sec
< 1 sec
Technology
Co-Op tracking
Low signal tracking
Advanced Multipath mitigation
WAAS
Adjustable PLL and DLL parameters
Radio Modem
Spread Spectrum Internal 915 MHz or 2.4 GHz Spread Spectrum
transceiver
Table B-1. HiPer+ Specifications
Component Details