Collecting Almanacs
1-866-4TOPCON www.topconpositioning.com
2-49
Collecting Almanacs
Each satellite broadcasts a message (almanac) which gives the
approximate orbit for itself and all other satellites. If the receiver
has an almanac, you can considerably reduce the time needed to
search for and lock on to satellite signals.
The receiver regularly updates the almanac and stores the most
recent almanac in its Non-Volatile Random Access Memory
(NVRAM).
1. Set up the receiver in a location with a clear view of the sky.
2. Turn on the receiver.
NOTICE
If 15 minutes have passed and the receiver
does not lock on to satellites, you may need to
clear the NVRAM. See “Clearing the NVRAM”
on page 4-18 for this procedure.
You will need to collect or update the almanac:
• If the receiver has been off for a long time.
• If the last known receiver position, stored in the NVRAM, is
different from the present position by several hundred
kilometers.
• After loading a new OAF.
• After loading new firmware.
• After clearing the NVRAM.
•Before surveying.
The collection and/or update of an almanac can take as long as 15
minutes.
To Next Page
Loading...
