Configuration
Topcon HiPer+ Operator’s Manual
2-40
Configuring a GSM Radio Modem
NOTICE
To comply with RF exposure requirements,
maintain at least 20cm between the user and
the GSM radio modem.
To access your GSM radio modem, you will need to use
Topcon’s FC-1000 external controller and TopSURV. Refer
to the TopSURV Reference Manual or the TopSURV User’s
Manual for more detailed configuration information.
NOTICE
Configuration parameters are similar
regardless of the software used for configuring
a GSM modem.
Unlike the UHF radio modems and PDLCONF, TopSURV
automatically connects the receiver and modem boards for
configuration purposes. When you configure radios, you
configure the Base and Rover radios separately.
1. Using the RS232 cable, connect your external controller
(FC-1000) to the receiver’s serial port A.
2. Press the power buttons on the receiver and external
controller to turn them on, and start TopSURV.
To Next Page
Loading...
