Loading New Firmware
1-866-4TOPCON www.topconpositioning.com
4-27
Bluetooth Module Firmware
Bluetooth module firmware is released as a compressed file
that you download and decompress. This file contains the
following two files:
• btloader.ldr – the Bluetooth module RAM file
• btmain.ldp – the Bluetooth module Flash file
NOTICE
You must load both files when loading new
firmware. These files must come from the same
firmware package.
1. In FLoader, select the Device tab and set the Device
Type as Receiver (Figure 4-23).
Figure 4-23. Get Device Type
2. Click Get from Device for device information
(Figure 4-23).