Topcon HiPer Plus - Advanced->Multipath

Receiver Problems
1-866-4TOPCON www.topconpositioning.com
5-5
The survey is
conducted near
obstructions (tree
canopy, tall buildings,
etc.).
• Check that the Multipath Reduction
boxes have been enabled.
1. Connect your receiver and a
computer and start PC-CDU.
See “Connecting the HiPer+
and a Computer” on page 2-5.
2. Click Configuration
->Advanced->Multipath
Reduction and enable the two
boxes.
• Move to an area free of obstructions.
Problem
The receiver cannot obtain Code Differential and/or RTK
solutions.
Causes Solutions
An improper receiver
status has been chosen.
• Choose the correct receiver status.
1. Connect your receiver and a
computer and start PC-CDU.
See “Connecting the HiPer+
and a Computer” on page 2-5.
2. Click Configuration->Base or
Configuration->Rover and
ensure the receiver has the
correct status (kinematic,
RTK, or static)
• See “Surveying with the HiPer+” on
page 3-5 for further information.