Topcon HiPer Plus - Bluetooth Module Configuration

Bluetooth Module Configuration
1-866-4TOPCON www.topconpositioning.com
2-43
The Base radio is the Slave, only receiving calls from
Rover stations, so no phone number to call is
required.
• For the Rover radio – If your GSM modem does not
require a PIN, leave this field blank.
The Rover radio is the Master, sending calls to the
Base station. The Base station’s phone number is
required, so have it available to input at this time, or
select the correct number from the Phone number list
(if available).
At this time, you can press Add to save the phone
number to the list, or you can press Delete to remove
unwanted phone numbers from the list.
8. Press OK to return to the radio configuration screen.
Continue with other configuration or operation functions
as needed.
Bluetooth Module Configuration
Use BTCONF, the Bluetooth module’s configuration program,
and your computer to:
• access the Bluetooth wireless technology module
• configure the Bluetooth module
• check or change the module’s configuration
To access the Bluetooth wireless technology module, first
download and install BTCONF, then connect your computer and
the receiver and run the configuration program.
1. Create or locate the following folder:
C:\Program Files\TPS\BTCONF
2. Download btconf.zip from the TPS website and unzip it into
the BTCONF folder. This zip file contains Btconf.exe, the
executable file for the Bluetooth module configuration
program.