Topcon HiPer Plus - Software

Introduction
Topcon HiPer+ Operator’s Manual
1-8
Software
Standard HiPer+ software includes:
• PC-CDU – controller software that can run on a
Windows-based computer. Please refer to the PC-CDU
User’s Manual for detailed information on this software.
• GPS radio configuration software – third party software,
such as PDLCONF from Pacific Crest.
• Topcon Tools – Topcon’s post-processing software.
Software and software information are also available on the
Topcon website (www.topcongps.com/software/index.html
or http://www.topcongps.com/software/3rdparty.html).
The following software will also be useful for operating,
caring for and using your HiPer+ receiver, and may be
required for some applications.
• FLoader – Topcon’s firmware loader; available on the
Topcon website.
• PDLCONF from Pacific Crest – radio configuration
program included with Base station package; firmware
upgrades available from the Pacific Crest website
(www.paccrst.com/download/upgrade.htm).
• BTCONF – Topcon’s Bluetooth module configuration
program; available on the Topcon website.
• TopSURV – Topcon’s field data collection software;
among many other functions, can be used to configure
the radio/modem.
• Survey Pro GPS – optional third-party software for data
collection and display; contact your TPS dealer.
• Carlson SurvCE – optional third-party software for data
collection; contact your TPS dealer.