Topcon HiPer Plus - BTCONF Identification Tab

Configuration
Topcon HiPer+ Operator’s Manual
2-46
Figure 2-42. BTCONF Identification Tab
Notice that the COM port and baud rate display in the lower
left corner.
6. Click the Parameters tab (Figure 2-43). The Parameters tab
sets identifying and security information for your Bluetooth
module. The security section allows you to set data security
and unauthorized access parameters for the Bluetooth
module.
7. Enter up to 14 characters to set a unique name for the
Bluetooth module (Figure 2-43), and click Apply.
Figure 2-43. BTCONF Parameters Tab